NuTone VX550 Installation Guide download pdf (Page 19)

5. Attach the low voltage wires to terminal screws on back

of wall inlet (Figure 35). If using 361 Rough-in with CI370

Series Inlets, refer to instructions on page 7, step 3,

shown in Figure 10.

6. Insert wall inlet into bracket and secure with the two

screws provided (Figure 36).

MODEL 330 & CI335 SERIES

WALL INLET INSTALLATION

CF329 ROUGH-IN)

1. Make cutout according to dimensions in Figure 37.

2. Refer to Figure 38. Break off nail plate at scored line.

3. Refer to Figure 39. Glue elbow to mounting plate, place

assembly into cutout, and attach elbow to tubing inside

the wall.

4. Make sure mounting holes are exactly at top and bottom.

5. Connect 2-conductor low voltage wire to terminal screws

on back of wall inlet.

6. Refer to Figure 40. Align inlet mounting holes with

mounting plate holes, place inlet into mounting plate, and

secure with provided screws.

NOTE: If CF382S shorter radius elbow is used, it may

be necessary to use the short mounting screw to avoid

interference with elbow.

AE0040

AR0047

/ 8"

" (10 mm) DIA.

(6 mm)

/4"

(70 mm)

(98 mm)

(35 mm)

/8"

AD0020A

1/4"

3/8

(6 mm)

1/4"

Nail Flang

AO0039A

FIGURE 37

FIGURE 35

FIGURE 38

MOUNTING

PLATE

MOUNTING

HOLE (2)

ELBOW

AD0021A

INLET

MOUNTING

PLATE

AE0024A

FIGURE 40FIGURE 39

FIGURE 36

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Comments to this Manuals

No comments

NuTone VX550 Installation Guide Page 19

Comments to this Manuals

Related products and manuals for Vacuum cleaners NuTone VX550