Nutone WS1 User Manual download pdf

Page 1

ALLURE™ WS1 SERIES

RANGE HOOD

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO

PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer. If you

have questions, contact the manufacturer at the address or telephone

number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service panel and

lock the service disconnecting means to prevent power from being

switched on accidentally. When the service disconnecting means can-

not be locked, securely fasten a prominent warning device, such as a

tag, to the service panel.

3. Installation work and electrical wiring must be done by a qualified

person(s) in accordance with all applicable codes and standards, in-

cluding fire-rated construction codes and standards.

4. Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent

backdrafting. Follow the heating equipment manufacturer’s guideline

and safety standards such as those published by the National Fire

Protection Association (NFPA), and the American Society of Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE), and the local

code authorities.

5. When cutting or drilling into wall or ceiling, do not damage electrical

wiring and other hidden utilities.

6. To reduce the risk of fire or electric shock, do not use this range hood

with an additional speed control device.

7. Ducted fans must always be vented to the outdoors.

8. To reduce the risk of fire, use only metal ductwork.

9. Use with approved cord-connection kit only.

10.This unit must be grounded.

TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

1. Never leave surface units unattended at high settings. Boilovers

cause smoking and greasy spillovers that may ignite. Heat oils slowly

on low or medium settings.

2. Always turn hood ON when cooking at high heat or when cooking

flaming foods.

3. Clean ventilating fans frequently. Grease should not be allowed to

accumulate on fan or filter.

4. Use proper pan size. Always use cookware appropriate for the size

of the surface element.

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF

A RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*

1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal

tray, then turn off the burner. BE CAREFUL TO PREVENT BURNS.

If the flames do not go out immediately, EVACUATE AND CALL THE

FIRE DEPARTMENT.

2. NEVER PICK UP A FLAMING PAN — You may be burned.

3. DO NOT USE WATER, including wet dishcloths or towels - violent

steam explosion will result.

4. Use an extinguisher ONLY if:

A. You know you have a Class ABC extinguisher and you already

know how to operate it.

B. The fire is small and contained in the area where it started.

C. The fire department is being called.

D. You can fight the fire with your back to an exit.

* Based on “Kitchen Fire Safety Tips” published by NFPA.

ALLURE

™

WS1 SERIES

RANGE HOODS

READ AND SAVE THESE INSTRUCTIONS

Installer: Leave this manual with

the homeowner.

Homeowner: Operating and

Cleaning information on page 5.

Page 1

CAUTION

1. For general ventilating use only. Do not use to exhaust hazardous or

explosive materials and vapors.

2. To avoid motor bearing damage and noisy and/or unbalanced impel-

lers, keep drywall spray, construction dust, etc. off power unit.

3. For best capture of cooking impurities, your range hood should be

mounted so that the top of the hood is 24-30” above the cooking

surface.

4. Please read specification label on product for further information and

requirements.

TABLE OF CONTENTS

This manual is divided into sections as follows:

• “PREPARE HOOD LOCATION”

Run ductwork from roof or wall cap, and electrical wiring from

service panel - to installation location

• “PREPARE THE HOOD”

Get your hood ready for installation

• “CONNECT WIRING”

Make electrical wiring connections to hood

• “INSTALL HOOD”

Secure hood to cabinet and ductwork - install bulbs and filters

• “OPERATION”

How to use the hood controls

• “CLEANING”

Keep your hood in top working condition

• “SERVICE PARTS”

Part numbers and exploded view of hood components

• “WARRANTY”

One-year limited warranty and how to contact us

NOTE If hood is to be installed Non-Ducted:

• Purchase a set of (2) non-ducted filters from your

local distributor or retailer and attach them to the

aluminum mesh filters.

Patent No.:

US D450, 829 S

FOR DOMESTIC COOKING ONLY

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - RANGE HOODS

®Page 1ALLURE™ WS1 SERIESRANGE HOOD!WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TOPERSONS, OBSERVE THE FOLLOWING:1. Use this unit o

Page 2 - PREPARE THE HOOD

®Page 10ALLURE™ WS1 SERIESRANGE HOODCONEXIÓN ELÉCTRICA1 Haga la conexión eléctrica del suministro doméstico (120VCA) en la campana. Si es necesario,

Page 3 - RANGE HOOD

®Page 11ALLURE™ WS1 SERIESRANGE HOODCAMPANA EXTRACTORASERIE WS1 ALLURE™Página 11ADVERTENCIA: Para reducir el riesgo de una des-carga eléctrica, desc

Page 4 - CONNECT WIRING

®Page 12ALLURE™ WS1 SERIESRANGE HOODCAMPANA EXTRACTORASERIE WS1 ALLURE™626976BCAMPANA EXTRACTORASERIE WS1 ALLURE™Página 12PIEZAS DE SERVICIOCLAVE NO

Page 5 - NON-DUCTED FILTERS

®Page 2ALLURE™ WS1 SERIESRANGE HOODCABINETBOTTOMCABINET FRONTHORIZONTAL DUCTACCESS HOLE5¼"5¼"7½"1/8"¾"1315/16" (30&quo

Page 6 - SERVICE PARTS

®Page 3ALLURE™ WS1 SERIESRANGE HOODPREPARE THE HOOD PREPARE THE HOOD3 RemoveDamper/DuctConnector frominside the hood.Set connectoraside - withmounti

Page 7 - SERIE WS1 ALLURE

®Page 4ALLURE™ WS1 SERIESRANGE HOODCONNECT WIRINGWARNING: To reduce the risk of electric shock,make sure power is switched off at the servicepanel.

Page 8 - SE VA A INSTALAR LA CAMPANA

®Page 5ALLURE™ WS1 SERIESRANGE HOODWARNING: To reduce the risk of electric shock,disconnect from power supply before cleaning.Aluminum mesh filters:

Page 9

®Page 6ALLURE™ WS1 SERIESRANGE HOOD626976BWARRANTYNUTONE ONE YEAR LIMITED WARRANTYNuTone warrants to the original consumer purchaser of its product

Page 10 - PREPARACIÓN DE LA CAMPANA

®Page 7ALLURE™ WS1 SERIESRANGE HOOD!ADVERTENCIAPARA REDUCIR EL RIESGO DE INCENDIO, CHOQUE ELECTRICO, O LE-SION A PERSONAS, PROCURE LO SIGUIENTE:1. U

Page 11 - INSTALACIÓN DE LA CAMPANA

®Page 8ALLURE™ WS1 SERIESRANGE HOODTORNILLOS PARA EL MONTAJE DE LA CAMPANA (4)12.7 cm35.4 cm (campana de 76.2 cm)43.0 cm (campana de 91.4 cm)50.6 cm

Page 12 - PIEZAS DE SERVICIO

®Page 9ALLURE™ WS1 SERIESRANGE HOODPREPARACIÓN DE LA CAMPANAPREPARACIÓN DE LA CAMPANAPágina 93 Quite el conector delregulador de tiro/conector del i

Comments to this Manuals

No comments

Nutone WS1 User Manual

Browse online or download User Manual for Fans Nutone WS1. NuTone WS1 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Fans Nutone WS1