NuTone 791LEDNT Instruction Manual download pdf (Page 2)

Page 2

MODEL 791LEDNT

3. Use (4) mounting screws (included) to attach housing

to joist.

Existing Construction

2. In attic,

position fan

housing

against joist.

Trace outline

of housing

on ceiling

material.

1. Choose the location for your fan/light in the ceiling. For

best possible performance, use the shortest possible duct

run and a minimum number of elbows.

INSTALL THE HOUSING

2. Position fan housing against joist so that bottom

edge of housing will be flush with finished ceiling.

Additional positioning feature for 1/2” thick

ceiling material:

Bend tab, on either side of housing,

outward. Lift

housing until tab contacts bottom edge of joist.

New Construction

1. Choose the location for your fan/light in the ceiling. For

best possible performance, use the shortest possible duct

run and a minimum number of elbows.

PREPARE THE HOUSING

2. Remove blower

assembly from

housing and set

blower assembly

aside.

3. Unplug light wires

from white receptacle.

Remove wiring plate

from housing and set

plate aside.

TAB

BOTTOM EDGE OF JOIST

MOUNTING SCREWS

TAB

3. Set housing aside

and cut ceiling

opening slightly

larger than marked.

1. Unplug blower and remove (3) screws securing blower

assembly to housing.

45° 45°

NOT FOR USE IN A COOKING AREA

Do not install above or inside this area

Floor

Cooking

Equipment

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

NuTone 791LEDNT Instruction Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown NuTone 791LEDNT