NuTone 791LEDNT Instruction Manual download pdf (Page 1)

Page 1

MODEL 791LEDNT

VENTILATION FAN

WITH LED LIGHT

READ AND SAVE THESE INSTRUCTIONS

TYPICAL INSTALLATIONS

HOUSING

GRILLE

CEILING

JOIST

CEILING

MATERIAL

HOUSING

HOUSING MOUNTED

DIRECTLY TO JOIST

2x6 (or larger)

Discharge parallel to joists.

HOUSING

2 x 4

CEILING

JOIST or

TRUSS

2 x 4

CEILING

JOIST or

TRUSS

CEILING

MATERIAL

GRILLE

HOUSING MOUNTED

TO 2x4 TRUSS

Discharge parallel to joists.

HOUSING

ADDITIONAL

FRAMING

JOIST

CEILING

MATERIAL

GRILLE

HOUSING MOUNTED TO “I” JOIST

Requires additional framing

for mounting.

Discharge parallel to joists.

Additional framing must be a 2x6 (minimum height).

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufacturer.

If you have questions, contact the manufacturer at the

address or telephone number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service

panel and lock the service disconnecting means to prevent

power from being switched on accidentally. When the service

disconnecting means cannot be locked, securely fasten a

prominent warning device, such as a tag, to the service panel.

3. Installation work and electrical wiring must be done by a

qualified person(s) in accordance with all applicable codes

and standards, including fire-rated construction codes and

standards.

4. Sufficient air is needed for proper combustion and exhausting

of gases through the flue (chimney) of fuel burning equipment

to prevent backdrafting. Follow the heating equipment

manufacturer’s guideline and safety standards such as those

published by the National Fire Protection Association (NFPA),

and the American Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the local code

authorities.

5. When cutting or drilling into wall or ceiling, do not damage

electrical wiring and other hidden utilities.

6. Ducted fans must always be vented to the outdoors.

7. Acceptable for use over a tub or shower when connected to

a GFCI (Ground Fault Circuit Interrupter) - protected branch

circuit.

8. Not for use in kitchens.

9. This unit must be grounded.

10. This unit is U.L. listed. Type I.C. inherently protected.

CAUTION

1. For general ventilating use only. Do not use to exhaust

hazardous or explosive materials and vapors.

2. This product is designed for installation in FLAT CEILINGS

ONLY. Do not mount this product in a wall.

3. The light fixture assembly must be mounted to the fan

housing assembly included with this product. Do not mount

the light fixture assembly to a wiring outlet box.

4. To avoid motor bearing damage and noisy and/or

unbalanced impellers, keep drywall spray, construction

dust, etc. off power unit.

5. Please read specification label on product for further

information and requirements.

Installer: Leave this manual with the

homeowner.

Homeowner: Use and Care

information on page 4.

PLAN THE INSTALLATION

ROOF CAP*

(with built-in

damper)

WALL CAP*

(with built-in

damper)

4-IN. ROUND

ELBOWS*

4-IN. ROUND

DUCT*

FAN

HOUSING

Seal gaps

around

housing.

Seal duct

joints with

tape.

Keep duct

runs short.

INSULATION

(Place around and

over fan housing.)

POWER

CABLE*

*Purchase

separately.

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - WITH LED LIGHT

Page 1MODEL 791LEDNTVENTILATION FAN WITH LED LIGHTREAD AND SAVE THESE INSTRUCTIONSTYPICAL INSTALLATIONSHOUSINGGRILLECEILINGJOISTCEILINGMATERIALHOUSIN

Page 2 - PREPARE THE HOUSING

Page 2MODEL 791LEDNT3. Use (4) mounting screws (included) to attach housing to joist.Existing Construction2. In attic, position fan housing against j

Page 3 - USE AND CARE

Page 3MODEL 791LEDNTBLKVENTSWITCHBLUBLKWHTWHTWHTLIGHT(WHITE)GRDVENT(BLACK)UNITSWITCH BOXLIGHTSWITCHLINEINBLKREDWHTGRDSCHEMATIC WIRING DIAGRAMFINISH T

Page 4 - SERVICE PARTS

Page 4MODEL 791LEDNTSERVICE PARTS KEY NO. PART NO. DESCRIPTION 1 97019535 Grille Assembly (includes Key Nos. 2 & 3) 2 99111615 Lens

Page 5 - PLANEACIÓN DE LA INSTALACIÓN

Página 5MODELO 791LEDNTVENTILADOR CON LUZ LEDLEA Y CONSERVE ESTAS INSTRUCCIONESINSTALACIONES TÍPICASHOUSINGREJILLAVIGUETADE CIELORASOMATERIAL DEL CI

Page 6 - PREPARACIÓN DE LA CUBIERTA

Página 6MODELO 791LEDNT3. Use cuatro (4) tornillos de montaje (incluidos) para fijar la cubierta a la vigueta.Construcción existente2. En el ático,

Page 7 - DE CONDUCTOS

Página 7MODELO 791LEDNTNEGROAZULNEGROBLANCOBLANCOBLANCOLÁMPARA (BLANCO)TIERRAVENTILADOR (NEGRO)UNIDADCAJA DEL INTERRUPTORINTERRUPTOR D E L A LÁMP

Page 8 - Garantía limitada

Página 8MODELO 791LEDNTPida piezas de repuesto dando como referencia el N.o DE PIEZA, no el N.o DE CLAVE.N.º DE CLAVE N.º DE PIEZA DESCRIPCIÓN 1 9

Comments to this Manuals

No comments

NuTone 791LEDNT Instruction Manual Page 1

Browse online or download Instruction Manual for Unknown NuTone 791LEDNT. NuTone 791LEDNT Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

NuTone 791LEDNT Instruction Manual Page 1

Browse online or download Instruction Manual for Unknown NuTone 791LEDNT. NuTone 791LEDNT Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown NuTone 791LEDNT