NuTone CI-365 User Manual download pdf

READ INSTRUCTIONS BEFORE INSTALLATION

IMPORTANT NOTES:

1. For maximum clearance under cabinets use 2

/2" X 3

/2" short 90° elbow.

2. Check for an air tight seal at VacPan™ and elbow prior to installation.

3. If required, use Teflon tape to make air tight seal but do not use glue.

4. Make certain clearance is available in kick space prior to installation under cabinets.

5. Use central vacuum cover plate or double electrical blank plate for access cover when required.

6. Allow

/2" play in vacuum pipe at location of VacPan™ so that fitting connection can be lifted to install or remove

VacPan™.

INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

VacPan™ Automatic Dustpan Inlet

MODEL: CI-365

FIGURE 1

BRASS TERMINAL

CONTACT

SPRING TERMINAL

CONTACT

DO NOT GLUE

MADE IN CANADA

U.S. PATENT PENDING

CANADIAN PATENT PENDING

1 2 3 4

READ INSTRUCTIONS BEFORE INSTALLATIONIMPORTANT NOTES:1. For maximum clearance under cabinets use 2 1/2" X 3 1/2" short 90° elbow.2. Check

INSTALLATIONOPTION #1 - UNDER CABINET ACCESS TO PIPING FROM BELOWRefer to Figure 21. Select a location under cabinet for VacPan™ (6) so that new fitt

Page 3

INSTALLATIONOPTION #2 - IN WALLS ALONG BASE BOARDSRefer to Figure 3 (ACCESS TO PIPING FROM BELOW)1. Locate studs (1) in the wall at the location VacP

INSTALLATIONNEW HOME CONSTRUCTIONRefer to Figure 51. Cut out wall plate (9) between two studs at the location of VacPan™. Cut a 6 3/4" piece of

No comments

NuTone CI-365 User Manual