NuTone 788CHNT Instruction Manual download pdf

DECORATIVE VENTILATION

FAN WITH LIGHT

READ AND SAVE THESE INSTRUCTIONS

TYPICAL INSTALLATIONS

HOUSING

GRILLE

PAN

GLASS

LIGHT SHADE

CEILING

JOIST

CEILING

MATERIAL

HOUSING

HOUSING MOUNTED

DIRECTLY TO JOIST

2x6 (or larger)

Discharge parallel to joists.

HOUSING

2 x 4

CEILING

JOIST or

TRUSS

2 x 4

CEILING

JOIST or

TRUSS

CEILING

MATERIAL

GRILLE

PAN

GLASS

LIGHT SHADE

HOUSING MOUNTED

TO 2x4 TRUSS

Discharge parallel to joists.

HOUSING

ADDITIONAL

FRAMING

JOIST

GRILLE

PAN

GLASS LIGHT SHADE

CEILING

MATERIAL

HOUSING MOUNTED TO “I” JOIST

Requires additional framing

for mounting.

Discharge parallel to joists.

Additional framing must be a 2x6 (minimum height), at least 9-inches long.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR

INJURY TO PERSONS, OBSERVE THE FOLLOWING:

1. Use this unit only in the manner intended by the manufac-

turer. If you have questions, contact the manufacturer at

the address or telephone number listed in the warranty.

2. Before servicing or cleaning unit, switch power off at service

panel and lock the service disconnecting means to prevent

power from being switched on accidentally. When the

service disconnecting means cannot be locked, securely

fasten a prominent warning device, such as a tag, to the

service panel.

3. Installation work and electrical wiring must be done by a

qualified person(s) in accordance with all applicable codes

and standards, including fire-rated construction codes and

standards.

4. Sufficient air is needed for proper combustion and exhaust-

ing of gases through the flue (chimney) of fuel burning

equipment to prevent backdrafting. Follow the heating

equipment manufacturer’s guideline and safety standards

such as those published by the National Fire Protection

Association (NFPA), and the American Society for Heating,

Refrigeration and Air Conditioning Engineers (ASHRAE),

and the local code authorities.

5. When cutting or drilling into wall or ceiling, do not damage

electrical wiring and other hidden utilities.

6. Ducted fans must always be vented to the outdoors.

7. Do not install in a tub or shower enclosure.

8. Not for use in kitchens.

9. This unit must be grounded.

10. This unit is U.L. listed. Type I.C. inherently protected.

CAUTION

1. For general ventilating use only. Do not use to exhaust

hazardous or explosive materials and vapors.

2. This product is designed for installation in FLAT CEILINGS

ONLY. Do not mount this product in a wall.

3. The light fixture assembly must be mounted to the fan hous-

ing assembly included with this product. Do not mount the

light fixture assembly to a wiring outlet box.

4. To avoid motor bearing damage and noisy and/or unbal-

anced impellers, keep drywall spray, construction dust, etc.

off power unit.

5. Please read specification label on product for further infor-

mation and requirements.

PLAN THE INSTALLATION

ROOF CAP*

(with built-in

damper)

WALL CAP*

(with built-in

damper)

4-IN. ROUND

ELBOWS*

4-IN. ROUND

DUCT*

FAN

HOUSING

Seal gaps

around

housing.

Seal duct

joints with

tape.

Keep duct

runs short.

INSULATION

(Place around and

over fan housing.)

POWER

CABLE*

*Purchase

separately.

Installer: Leave this manual with the

homeowner.

Homeowner: Use and Care

information on page 4.

Page 1

MODEL 788CHNT

1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - FAN WITH LIGHT

DECORATIVE VENTILATION FAN WITH LIGHTREAD AND SAVE THESE INSTRUCTIONSTYPICAL INSTALLATIONSHOUSINGGRILLEPANGLASSLIGHT SHADECEILINGJOISTCEILINGMATERIALH

Page 2 - PREPARE THE HOUSING

3. Use (4) mounting screws (included) to attach housing to joist.Existing Construction2. In attic, position fan housing against joist. Trace outline o

Page 3 - CONNECT THE WIRING

BLKVENTSWITCHBLUBLKWHTWHTWHTLIGHT(WHITE)GRDVENT(BLACK)UNITSWITCH BOXLIGHTSWITCHLINEINBLKREDWHTGRDSCHEMATIC WIRING DIAGRAMFINISH THE INSTALLATIONINSTAL

Page 4 - SERVICE PARTS

USE AND CARE USE AND CAREWARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND LOCK OUT SERVICE PANEL BEFORE CLEANING OR SERVICING THIS UNIT.BULB REPLACEMEN

Page 5 - CON LÁMPARA

ROOF CAP*(with built-indamper)WALL CAP*(with built-indamper)4-IN. ROUNDELBOWS*4-IN. ROUNDDUCT*FANHOUSINGSeal gapsaroundhousing.Seal ductjoints withtap

Page 6 - TORNILLOS DE MONTAJE

Construcción existente2. En el ático, coloque la cubierta del ventilador contra la viga. Haga un trazo del perímetro de la cubierta en el material del

Page 7 - CONECTE EL CABLEADO

NEGROAZULNEGROBLANCOBLANCOBLANCOLÁMPARA(BLANCO)TIERRAVENTILADOR(NEGRO)UNIDADCAJA DEL INTERRUPTORNEGROROJOBLANCOTIERRAINTERRUPTOR DE LA LÁMPARAINTERRUP

Page 8 - PIEZAS DE SERVICIO GARANTÍA

USO Y CUIDADO USO Y CUIDADOADVERTENCIA: ANTES DE LIMPIAR O DAR SERVICIO ESTA UNIDAD, DESCONECTE EL SUMINISTRO DE ENERGÍA Y BLOQUEE EL PANEL DE SERVICI

Comments to this Manuals

No comments

NuTone 788CHNT Instruction Manual

Browse online or download Instruction Manual for Unknown NuTone 788CHNT. NuTone 788CHNT Instructions / Assembly User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown NuTone 788CHNT